The working principle of an externally mixed self priming pump is to fill the pump casing with water (or to store water within the casing itself) before starting the water pump. After starting, the impeller rotates at high speed, causing the water flow in the impeller groove to flow towards the vortex shell. At this time, a vacuum is formed at the inlet, causing the inlet check valve to open. The air in the suction pipe enters the pump and reaches the outer edge through the impeller groove. On the other hand, the water discharged into the gas-water separation chamber by the impeller flows back to the outer edge of the impeller through the left and right return holes. The water flowing back from the left return hole is shot into the impeller groove under the action of pressure difference and gravity, and is crushed by the impeller. After mixing with the air from the suction pipeline, it is thrown towards the volute and flows in the direction of rotation.
The working principle of an internally mixed self-priming pump is the same as that of an externally mixed self-priming pump.
Most self priming pumps are paired with internal combustion engines and installed on movable small cars, making them suitable for outdoor operations.
Jan 05, 2024
Leave a message
Pump operation principle
Previous
Precautions for pumpsSend Inquiry




