The Special Structure Of Centrifugal Pumps

As a part of the pipeline, the pipeline pump does not need to be changed during installation
The submersible pump and electric motor are integrated and immersed in water
The pump body of the submerged pump is immersed in the liquid
The impeller of the shielded pump is integrated with the rotor of the motor and is located in the same sealed housing, without the need for a sealing structure, making it a leak free pump
The magnetic pump is completely enclosed except for the inlet and outlet, and the connection between the pump and the motor is driven by magnetic steel mutual suction
Self suction pump, no need to fill liquid when starting the pump
The high-speed pump is driven by a speed increase box to increase the pump shaft speed, which can generally reach a speed of 10000 r/min or above. It can also be called a partial flow pump or a tangential booster pump
The inlet and outlet pipes of the vertical cylindrical pump are at the same height on the upper part, with two layers of shells, inner and outer. The inner shell is composed of a rotor, guide vanes, etc. The outer shell is an inlet guide channel, and liquid is sucked in from the lower part.